Blank Cone Stoppers

Blank Cone Stoppers

LAMPE blank cone stoppers are a great alternative to the traditional inflatable stopper.

Features

  • Suitable for a variety of pipe profiles such as circular, ovoid, egg-shaped, elliptical, square and rectangular.
  • Can be used in a variety of pipe profiles, from 80-3,600mm diameter pipes.
  • One cone stopper shuts many different diameters. For example, a 1,400 shuts all pipes from 500-1,400mm.
  • No bracing is required.
Call for more info0333 567 3192

Premium inflatable stopper

Unlike traditional inflatable pipe stoppers which have to expand to seal the pipe, LAMPE cone stoppers make full contact with the pipe wall at a very low pressure (0.01 bar). When fully inflated to their working pressure of 1.0 bar, the cone stoppers are so secure in the pipe that they require no bracing against movement.

Features

  • Oil resistant stoppers are available.
  • If pressure is lost, the stopper will soften but remain in full contact with the pipe wall.
  • Its lightweight folding design allows for easy installation and handling.
  • Each stopper has a proven 30 year life span.
  • The stoppers are repairable, reducing damage costs.
  • All stoppers are tested and certified for quality and safety.

Selected sizes available to hire

  • 500-1,500mm
  • 200-400mm
  • 250-600mm
  • 400-1,000mm
  • 1000-2,200mm
  • 1800-3,200mm 

G F Tomlinson & Sons Ltd

G F Tomlinson & Sons Ltd of Derby, were the first to hire the NEW 800-1,700mm diameter Bypass Cushion.

The bypass cushion, with an internal bypass of 600mm diameter for the diversion of existing flows in a 1,500mm diameter brick culvert, was used while constructing a new manhole chamber on-line at their site in Birmingham.

The conventional use of pumps during the works was ruled out due to the location and restricted access so Ant Hire were contacted to see if an alternative was available.

The revolutionary new lightweight sewer sealing cushion is significantly different in design to traditional inflatable pipe stoppers. Unlike traditional pipe stoppers which have to expand to seal the pipe, LAMPE cushions make full contact with the pipe wall at a very low pressure (0.01 bar). When fully inflated to their working pressure of 1.0 bar, the cushions are so secure in the pipe that they require no bracing against movement.

The hire of the 800-1,700mm diameter Bypass Cushion proved to be a huge success.

Phil Newsum, Senior Site Agent for G F Tomlinson & Sons Ltd, was very pleased with both the ease of installation and the results of using the Bypass Cushion.

Phil said: "The cushion proved a great success, thanks for your help and advice, yet again."

Related Products

Cone Pipe Stoppers Products
Blank Cone Stoppers
Description:

LAMPE blank cone stoppers are a great alternative to the traditional inflatable stopper.

Features

  • Suitable for a variety of pipe profiles such as circular, ovoid, egg-shaped, elliptical, square and rectangular.
  • Can be used in a variety of pipe profiles, from 80-3,600mm diameter pipes.
  • One cone stopper shuts many different diameters. For example, a 1,400 shuts all pipes from 500-1,400mm.
  • No bracing is required.
Available for:
More Info

Premium inflatable stopper

Unlike traditional inflatable pipe stoppers which have to expand to seal the pipe, LAMPE cone stoppers make full contact with the pipe wall at a very low pressure (0.01 bar). When fully inflated to their working pressure of 1.0 bar, the cone stoppers are so secure in the pipe that they require no bracing against movement.

Features

  • Oil resistant stoppers are available.
  • If pressure is lost, the stopper will soften but remain in full contact with the pipe wall.
  • Its lightweight folding design allows for easy installation and handling.
  • Each stopper has a proven 30 year life span.
  • The stoppers are repairable, reducing damage costs.
  • All stoppers are tested and certified for quality and safety.

Selected sizes available to hire

  • 500-1,500mm
  • 200-400mm
  • 250-600mm
  • 400-1,000mm
  • 1000-2,200mm
  • 1800-3,200mm 
Case Studies

G F Tomlinson & Sons Ltd

G F Tomlinson & Sons Ltd of Derby, were the first to hire the NEW 800-1,700mm diameter Bypass Cushion.

The bypass cushion, with an internal bypass of 600mm diameter for the diversion of existing flows in a 1,500mm diameter brick culvert, was used while constructing a new manhole chamber on-line at their site in Birmingham.

The conventional use of pumps during the works was ruled out due to the location and restricted access so Ant Hire were contacted to see if an alternative was available.

The revolutionary new lightweight sewer sealing cushion is significantly different in design to traditional inflatable pipe stoppers. Unlike traditional pipe stoppers which have to expand to seal the pipe, LAMPE cushions make full contact with the pipe wall at a very low pressure (0.01 bar). When fully inflated to their working pressure of 1.0 bar, the cushions are so secure in the pipe that they require no bracing against movement.

The hire of the 800-1,700mm diameter Bypass Cushion proved to be a huge success.

Phil Newsum, Senior Site Agent for G F Tomlinson & Sons Ltd, was very pleased with both the ease of installation and the results of using the Bypass Cushion.

Phil said: "The cushion proved a great success, thanks for your help and advice, yet again."

Please enter your name and E-mail to download this item

Free Guide

Choosing the right lateral cutter Download

Free Guide

Manhole Construction Download

Blog

Subcribe to our blog for monthly updates from the Ant Hire Team Subscribe